AER800-C1PV VDSL Loop Extender Module

product_description

The AER800-C1PV is a card module for the multi-port enclosures that provides the subscriber line loop extender function. It is a simple, cost-effective solution used to extend the deployable range of VDSL technologies. This unique approach to VDSL deployment enables service providers to deliver to both POTS and VDSL services on any copper pair. The VDSL Loop Extender is an active element installed in the outside loop plant. It operates as an amplifier that amplifies and equalizes the signal.

The VDSL loop extender amplifies the signal power in the first downstream band and is designed to improve services for band-plans 8a-17. It will work with higher band-plans, but will not improve the additional bands. It is compatible with vectoring.

Parts List

  • AER800-C1PV: Single port subscriber line card.
  • AER800-4P, 8P or 24P: 4, 8, or 24 port enclosure.
  • AER800-PWR: power converter for enclosure.
  • AEC-B1P-D48, AEC-B1P-A110, or AEC-C2P: Installed at the CO to supply power to the AER800-1PV on a separate power pair

  • Improvement of VDSL downstream speeds up to 30 Mbps
  • Double the customers you can reach
  • Increase reach by 30-50%
  • Deliver 2-10 times the bandwidth
  • Cost effective way to prove broadband demand in marginal markets
  • Defer costly remote DSLAM
  • Improve service quality & reliability
  • Comprehensive over-voltage protection
  • Easy to install, deploy and maintain
  • Fully compatible with all VDSL systems
  • Fully compatible with analog voice
  • Fully compatible with vectoring
Input Power: AER800-PWRV 155VDC power distribution card
Power Consumption: 1.3W per line
Operating Temperature: -40°C ~ 60°C
Relative Humidity: 5%~ 95% (Non-condensing)