AER800-1PV VDSL Loop Extender


The AER800-1PV is a single port, express powered, VDSL Loop Extender. It is a simple, cost-effective solution used to extend the deployable range of VDSL technologies. This unique approach to VDSL deployment enables service providers to deliver to both POTS and VDSL services on any copper pair. The VDSL Loop Extender is an active element installed in the outside loop plant. It operates as an amplifier that amplifies and equalizes the signal.

The VDSL loop extender amplifies the signal power in the first downstream band and is designed to improve services for band-plans 8a-17. It will work with higher band-plans, but will not improve the additional bands. It is compatible with vectoring.

Parts List

  • AER800-1PV: Stand alone single port subscriber line unit.
  • AEC-B1P-D48, AEC-B1P-A110, or AEC-C2P: Installed at the CO or customer prem to supply power via extra power pair.

  • Solve customer escalations fast!
  • Double the customers you can reach
  • Increase reach by 60%
  • Deliver 2-10 times the bandwidth
  • Cost effective way to prove broadband demand in marginal markets
  • Defer costly remote DSLAM
  • Improve service quality & reliability
  • Comprehensive over-voltage protection
  • Easy to install, deploy and maintain
  • Fully compatible with all VDSL systems
  • Fully compatible with analog voice
  • Fully compatible with vectoring
Input Power: 60-155VDC via AEC series power supply on separate pair
Power Consumption: 0.3W per line
Operating Temperature: -40°C ~ 60°C
Relative Humidity: 5%~ 95% (Non-condensing) Fully compatible with VDSL2 band profile?8a?12a?17a,30a?PSD mask?EU32?EU64 Meets IP66 requirements for outdoor locations Fully compatible with ITU-T G.993.2, G994.1 Built-in lightning protection to 4000V(10/700?s)