The Vigor2930 is a Dual-WAN router with policy-based load-balance, fail-over and BoD ( Bandwidth on Demand ) ; it also features advanced bandwidth control mechanisms such as IP-layer QoS, NAT session limitation, bandwidth borrowed, etc., to allow easy, flexible and reliable access control and bandwidth management. The "V" in the model number identifies this product as having a built in VOIP ATA so you can attach plain old telephone sets and convert to VOIP inside the router.

Related Links Live Web Demo Datasheet Quick Start Guide User's Guide R&TTE Certification Downloads 1. Dual-WAN Outbound Policy-Based Load-Balance BoD ( Bandwidth on Demand ) WAN Connection Fail-over 2. VoIP Protocol : SIP, RTP / RTCP One Dozen SIP Registrars G.168 Line Echo-cancellation Automatic Gain Control Jitter Buffer ( 125ms ) Voice Codec : G.711 A / µ law G.723.1 G.726 G.729 A / B VAD / CNG Tone Generation and Detection : DTMF, Dial , Busy , Ring Back , Call Progress DTMF Tone : In Band / Out Band ( RFC-2833 ) / SIP Info FAX / Modem Support : G.711 Pass-Through T.38 for FAX Supplemental Services : Call Hold / Retrieve Call Waiting Call Waiting with Caller ID Call Transfer Call Forwarding ( Always , Busy and No Answer ) DND ( Do not Disturb ) Call Barring ( Incoming / Outgoing ) MWI ( Message Waiting Indicator ) ( RFC-3842 ) Hotline ISDN Loop-Through ISDN On-net / Off-net 3. Wireless Access Point IEEE 802.11n Compliant Wireless Client List Access Point Discovery WDS ( Wireless Distribution System ) Wireless LAN Isolation Wireless Rate-Control 64 / 128-bit WEP WPA / WPA2 802.1X Authentication with RADIUS Client Hidden SSID Multiple SSIDs MAC Address Access Control 4. WAN Protocol DHCP Client Static IP PPPoE PPTP L2TP * BPA 5. Firewall CSM ( Content Security Management ) for IM / P2P Applications Multi-NAT, DMZ Host , Port-Redirection and Open Port Policy-Based Firewall MAC Address Filter SPI ( Stateful Packet Inspection ) DoS / DDoS Protection IP Address Anti-spoofing E-Mail Alert and Logging via Syslog Bind IP to MAC Address 6. VPN Up to 100 VPN Tunnels Protocol : PPTP, IPSec , L2TP , L2TP over IPSec Encryption : MPPE and Hardware-Based AES / DES / 3DES Authentication : Hardware-Based MD5 , SHA-1 IKE Authentication : Pre-shared Key and Digital Signature ( X.509 ) LAN-to-LAN , Teleworker-to-LAN DHCP over IPSec NAT-Traversal ( NAT-T ) Dead Peer Detection ( DPD ) VPN Pass-Through 7. Bandwidth Management QoS : Guarantee Bandwidth for VoIP Class-based Bandwidth Guarantee by User-Defined Traffic Categories DiffServ Code Point Classifying 4-level Priority for each Direction ( Inbound / Outbound ) Bandwidth Borrowed Bandwidth / Session Limitation 8. Network Management Web-Based User Interface ( HTTP / HTTPS ) Quick Start Wizard CLI ( Command Line Interface, Telnet / SSH* ) Administration Access Control Configuration Backup / Restore Built-in Diagnostic Function Firmware Upgrade via TFTP/FTP Logging via Syslog SNMP Management MIB-II 9. Content Filter URL Keyword Blocking ( White List and Black List ) Java Applet , Cookies , Active X , Compressed , Executable , Multimedia File Blocking Web Content Filter ( SurfControl ) Time Schedule Control 10. Network Features DHCP Client / Relay / Server Port-based VLAN Dynamic DNS NTP Client Call Scheduling RADIUS Client DNS Cache / Proxy UPnP Routing Protocol : Static Routing RIP V2 Technical Specifications of Vigor2930Vn Hardware Interface LAN 4-port 10/100 Base-TX Switch WAN 2-port 10/100 Base-TX Ethernet VoIP 2-port FXS WLAN IEEE 802.11n Dual-WAN Outbound Policy-Based Load-Balance BoD ( Bandwidth on Demand ) WAN Connection Fail-over VoIP Protocol SIP , RTP / RTCP One Dozen SIP Registrars G.168 Line Echo-cancellation Automatic Gain Control Jitter Buffer ( 125ms ) Voice Codec G.711 A / µ Law G.723.1 G.726 G.729 A / B VAD / CNG Tone Generation and Detection DTMF , Dial , Busy , Ring Back , Call Progress DTMF Tone In Band / Out Band ( RFC-2833 ) / SIP info FAX / Modem Support G.711 Pass-through T.38 for FAX Supplemental Services Call Hold / Retrieve Call Waiting Call Waiting with Caller ID Call Transfer Call Forwarding ( Always , Busy and No Answer ) DND ( Do not Disturb ) Call Barring ( Incoming / Outgoing ) MWI ( Message Waiting Indicator ) ( RFC-3842 ) Hotline ISDN Loop-Through ISDN On-net / Off-net Wireless Access Point IEEE 802.11n Compliant Wireless Client List Access Point Discovery WDS ( Wireless Distribution System ) Wireless LAN Isolation Wireless Rate-Control 64 / 128-bit WEP WPA / WPA2 802.1X Authentication with RADIUS Client Hidden SSID Multiple SSIDs MAC Address Access Control WAN Protocol DHCP Client Static IP PPPoE PPTP L2TP * BPA Firewall CSM ( Content Security Management ) for IM / P2P Applications Multi-NAT, DMZ Host , Port-Redirection and Open Port Policy-Based Firewall MAC Address Filter SPI ( Stateful Packet Inspection ) DoS / DDoS Protection IP Address Anti-spoofing E-Mail Alert and Logging via Syslog Bind IP to MAC Address VPN Up to 100 VPN Tunnels Protocol : PPTP, IPSec , L2TP , L2TP over IPSec Encryption : MPPE and Hardware-Based AES / DES / 3DES Authentication : Hardware-Based MD5 , SHA-1 IKE Authentication : Pre-shared Key and Digital Signature ( X.509 ) LAN-to-LAN , Teleworker-to-LAN DHCP over IPSec NAT-Traversal ( NAT-T ) Dead Peer Detection ( DPD ) VPN Pass-Through Bandwidth Management QoS Guarantee Bandwidth for VoIP Class-based Bandwidth Guarantee by User-Defined Traffic Categories DiffServ Code Point Classifying 4-level Priority for each Direction ( Inbound / Outbound ) Bandwidth Borrowed Bandwidth / Session Limitation Network Management Web-Based User Interface ( HTTP / HTTPS ) Quick Start Wizard CLI ( Command Line Interface ) / Telnet / SSH* Administration Access Control Configuration Backup / Restore Built-in Diagnostic Function Firmware Upgrade via TFTP / FTP Logging via Syslog SNMP Management with MIB-II Content Filter URL Keyword Blocking ( White list and Black list ) Java Applet , Cookies , Active X , Compressed / Executable / Multimedia File Blocking Web Content Filter ( SurfControl ) Time Schedule Control Network Features DHCP Client / Relay / Server Dynamic DNS NTP Client Call Scheduling RADIUS Client DNS Cache / Proxy UPnP Port-Based VLAN Routing Protocol Static Routing RIP V2 Temperature Operating : 0°C ~ 45°C Storage : -25°C ~ 70°C Humidity 10% ~ 90% ( non-condensing ) Max. Power 18 Watt Dimension L240.96 * W165.07 * H43.96 ( mm ) Power DC 15V The Vigor2930 is a Dual-WAN router with policy-based load-balance, fail-over and BoD ( Bandwidth on Demand ) ; it also features advanced bandwidth control mechanisms such as IP-layer QoS, NAT session limitation, bandwidth borrowed, etc., to allow easy, flexible and reliable access control and bandwidth management. Figure 1. Front Panel Dual WAN Application It allows users to access Internet and combine the bandwidth of the dual WAN to speed up the transmission through the network. Each WAN port can connect to different ISPs, Even if the ISPs use different technology to provide telecommunication service (such as DSL, Cable modem, etc.). If any connection problem occurred on one of the ISP connections, all the traffic will be guided and switched to the normal communication port for proper operation. Figure 2. Dual WAN Application VoIP Application Vigor2930 "V" models provide twin analogue phone ports. Combining the characteristics of "V" models. It supports multiple SIP registrars with highly flexible configuration and call handling options. Figure 3. VoIP Application Firewall & VPN Application The SPI ( Stateful packet Inspection ) firewall uses object-based design to make settings of firewall policies easy. The CSM ( Content Security Management ) feature enables more precise and efficient access control for IM ( Instant Messenger ) and P2P ( Peer to Peer ) applications. Furthermore, functions such as DoS / DDoS ( Denial of Service / Distributed DoS ) and URL / Web content filtering minimize security threats both inside and outside the network. With hardware-based implementation of the VPN protocols, the Vigor2930 supports up to 100 VPN tunnels in compliance with advanced protocols such as IPSec / PPTP / L2TP / L2TP over IPSec with AES / DES / 3DES for encryption and MD5 / SHA-1 for authentication. Figure 4. Firewall & VPN Application